Categories
Contact us
E-mail: admin@xungaotech.com
Phone: +86-15542580593
WhatsApp: +8615542580593
Changling Town, Zhuanghe City, Dalian City, Liaoning Province, China
DEH-YT80M
Share to
- 产品描述
-
Performance Characteristics
(1) High Precision - All three coordinates of the machine tool screw use high-precision ball screw pairs, special screw bearings, and pre-tightened double nuts to enhance rigidity and ensure more stable precision. After stretching the ball screw, the transmission rigidity is greatly improved, eliminating the effects of thermal deformation caused by rapid movement. The machine tool positioning accuracy is: ±0.003mm/X, ±0.0025mm/Y, Z, and the repeat positioning accuracy is: ±0.0025mm/X, ±0.002mm/Y, Z.
(2) High Speed - High-speed, high-precision spindle: Uses high-torque toothed belt drive, without sliding, greatly reducing transmission noise and heat generation. The spindle uses precision-grade angular contact ball bearings. The standard spindle speed can reach 6000r/min. The BT50 spindle uses high-performance grease-lubricated spindle bearings, and the economical spindle head cooling system effectively controls high-speed spindle temperature rise. The spindle uses IRD dynamic balance correction equipment to directly correct the spindle dynamic balance, avoiding resonance during high-speed operation and ensuring optimal machining accuracy. Uses X, Y, Z 3-coordinate guide rails (X, Y, Z: linear scale (55MM)), with a rapid traverse speed of 24m/min. During tool changing, the machine tool robot arm releases the spindle, and rapid tool changing is achieved through a cam linkage (tool change time: 2.5 seconds). Full pallet changing also uses two sets of continuous cam movements for rapid replacement (replacement time: 12.5 seconds). All the above parameters are at the leading domestic level and internationally advanced level.
(3) High Rigidity - The machine tool body uses resin sand high-phosphorus castings, with the bed body integrally cast, and the column, slide, and worktable moving on it. The pallet changer and tool magazine robot arm are fixed to the bed, ensuring the overall rigidity of the machine tool. In addition, finite element analysis was used during the design process to make the structure more reasonable. The machine tool weight of 24.5 tons also fully demonstrates the high rigidity of the machine tool.
Main Features of the Machine Tool:
1. Large machining range, X, Y, Z travel: 1100mm, 850mm, 900mm;2. Uses caged linear roller guide rails, increasing guide rail service life by 2.4 times. X, Y, Z: linear scale (55MM);
3-1. Uses a built-in two-speed high-speed motor spindle to ensure high and low-speed machining performance and high-speed machining (optional);
3-2. Uses a 5000rpm high-torque gearbox to ensure high and low-speed machining performance (optional);
4. Uses advanced high-precision hollow cooling screw technology to improve machine tool machining accuracy (optional);
5. Uses advanced temperature compensation technology to improve machining accuracy (optional);
6. The machine tool rapid traverse speed is 24m/min, making the machine tool more stable;
7. During tool changing, the machine tool robot arm releases the spindle and tool, and rapid tool changing is achieved through a cam linkage (tool change time: 2.5 seconds);
8. The worktable can be equipped with a pallet changer. The entire replacement process also uses two sets of continuous cam movements for rapid replacement (replacement time: 12 seconds);
9. The bed is integrally cast. The machine tool structure is more reasonable through finite element analysis during the design process. The machine tool weighs 13.5 tons, indicating that the machine tool has high rigidity;
10. Advanced FANUC 0i MF Plus CNC system;
Keywords:
Get More Product Information For Free
*Note: Please fill in the information accurately and keep the communication open. We will contact you as soon as possible.
Address
Changling Town, Zhuanghe City, Dalian City, Liaoning Province, China
Powered by 300.cn | TAG 丨 City