Faroe Islands DEL-600-MY/750
Larger bed swing diameter: Φ920
Larger machining diameter: Φ600
Larger machining diameter on the tool post: Φ600
Category:
Description
| Project | Unit | DEL-600 | DEL-400 |
|---|---|---|---|
| Worktable maximum swing diameter | mm | Φ920 | - |
| Maximum machining diameter | mm | Φ600 | - |
| Turret maximum machining diameter | mm | Φ600 | - |
| Maximum machining length | mm | φ650 | 590 |
| Spindle box type | - | A2-8 | A2-11 |
| Optional chuck (special configuration) | - | 10"（12"） | 12"（15"） |
| Recommended spindle motor power | kW | 22-30 | - |
| Maximum spindle speed | rpm | 2500 | 1800 |
| Spindle through hole diameter | mm | Φ87 | Φ102 |
| Bar pass diameter | mm | Φ75 | Φ91 |
| X/Z/Y axis ball screw specifications | mm | 4008/5010 | - |
| X/Z/Y axis guide rail specifications | - | Hard rail | - |
| X/Z/Y axis maximum stroke | mm | 330/940/120（±60） | - |
| Recommended X/Z/Y axis motor torque | N.m | 22/22/15 | - |
| X/Z/Y axis connection method | - | Direct connection/Direct connection/Synchronous wheel | - |
| Optional turret (special configuration) | - | Sanwa SH025BR-380(cylinder through BMT65-380-V12) | - |
| Power head specifications | - | BMT65/ER32 | - |
| Power head speed | rpm | 5000 | - |
| Power shaft to tool holder transmission ratio | - | 1:1 | - |
| Recommended turret center height | mm | 125 | - |
| Sleeve diameter | mm | 100 | - |
| Sleeve stroke | mm | 80 | - |
| Tailstock maximum stroke | mm | 785 | - |
| Tailstock sleeve taper hole | - | Morse Taper No.5 | - |
| Bed type | - | Integral | - |
| Bed angle | deg. | 30° | - |
| Overall dimensions (length × width × height) | mm | 2940 x 1503 x 1950 | - |
Address
Changling Town, Zhuanghe City, Dalian City, Liaoning Province, China
Powered by 300.cn | TAG 丨 City