Estonia DEL-600-MY/2000
Larger bed swing diameter: Φ920
Larger machining diameter: Φ600
Larger machining diameter on the tool post: Φ600
Category:
Description
| Project | Unit | DEL-600 | DEL-400 |
| Maximum swing diameter on bed | mm | Φ920 | - |
| Maximum machining diameter | mm | Φ600 | - |
| Maximum machining diameter on turret | mm | Φ600 | - |
| Maximum machining length | mm | 2100 | 2040 |
| Spindle box type | - | A2-8 | A2-11 |
| Optional chuck (special configuration) | inch | 10 inch (12 inch) | 12 inch (15 inch) |
| Recommended spindle motor power | kW | 22-30 | - |
| Maximum spindle speed | rpm | 2500 | 1800 |
| Spindle bore | mm | Φ87 | Φ102 |
| Bar pass diameter | mm | Φ75 | Φ88 |
| X/Z/Y axis ball screw specifications | mm | 4008/5010 | - |
| X/Z/Y axis guideway specifications | - | Hard guideway | - |
| Maximum X/Z/Y axis travel | mm | 330/2440/120 (±60) | - |
| Recommended X/Z/Y axis motor torque | N.m | 22/22/15 | - |
| X/Z/Y axis connection method | - | Direct connection/Direct connection/Synchronous wheel | - |
| Optional turret (special configuration) | - | Sanwa SH025BR-380 (cylinder through BMT65-380-V12) | - |
| Power head specifications | - | BMT65/ER32 | - |
| Power head speed | rpm | 5000 | - |
| Transmission ratio from power shaft to tool holder | - | 1:1 | - |
| Recommended turret center height | mm | 125 | - |
| Sleeve diameter | mm | 100 | - |
| Sleeve stroke | mm | 80 | - |
| Maximum tailstock stroke | mm | 2285 | - |
| Tailstock sleeve taper hole | - | Morse taper 5 | - |
| Bed type | - | Integral | - |
| Bed angle | deg. | 30° | - |
| Overall dimensions (length × width × height) | mm | 4440 x 1503 x 1950 | - |
Address
Changling Town, Zhuanghe City, Dalian City, Liaoning Province, China
Powered by 300.cn | TAG 丨 City